Wasp-barcode WDI4600 2D Product Reference Guide Manuale Utente Scaricare il pdf (Pagina 222)

References

212

WDI4600

Disable Character

Specifies the value of the RS-232 host command used to disable the reader.

ASCII characters or any hex value from 0 to

0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host com-

mands conflicts with normal operation of these characters. 8-bit data is

not reco

gnized when the option

Data Bits

has been set as 7 Data Bits.

To set the value:

1. Determine the desired character or value. A setting of 0xFF indicates the Disable Charac-

ter is not used (not available).

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 30 and scan the ENTER/EXIT PROGRAMMING MODE barcode to enter

Programming Mode.

4. Scan the barcode: SELECT DISABLE CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 1 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming

Mod

This completes the procedure. See Table 30 for some examples of how to set this feature.

Table 30. Disable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘d’ ‘}’ ‘D’

Disable Command

Not Used

Hex equivalent from

ASCII

Chart

0x64 0x7D 0x44 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT DISABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘4’ ‘7’ and ‘D’ ‘4’ and ‘4’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 283 284

Commenti su questo manuale

Nessun commento

Wasp-barcode WDI4600 2D Product Reference Guide Manuale Utente Pagina 222

Commenti su questo manuale

Prodotti e manuali riguardandi Scanner Wasp-barcode WDI4600 2D Product Reference Guide