Wasp-barcode WLS9600 Product Reference Guide Manuale Utente Scaricare il pdf (Pagina 247)

RS-232 Parameters

Product Reference Guide

237

Disable Character

Specifies the value of the RS-232 host command used to disable the reader.

ASCII characters or any hex value from 0 to

0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host

commands conflicts with normal operation of these characters. 8-

bit data is not recognized when the option

Data Bits

has been set

as 7 Data Bits.

To set the value:

1. Determine the desired character or value. A setting of 0xFF indicates the Disable Charac-

ter is not used (not available).

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 31 and scan the ENTER/EXIT PROGRAMMING MODE barcode to enter

Programming Mode.

4. Scan the barcode: SELECT DISABLE CHARACTER SETTING.

5. Scan the appropriate two alpha-numeric ch

arac

ters from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 1 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming

Mod

This completes the procedure. See Table 33 for some examples of how to set this feature.

Table 33. Disable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘d’ ‘}’ ‘D’

Disable Command

Not Used

Hex equivalent from

ASCII

Chart

0x64 0x7D 0x44 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT DISABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘4’ ‘7’ and ‘D’ ‘4’ and ‘4’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 305 306

Commenti su questo manuale

Nessun commento

Wasp-barcode WLS9600 Product Reference Guide Manuale Utente Pagina 247

Commenti su questo manuale

Prodotti e manuali riguardandi Scanner Wasp-barcode WLS9600 Product Reference Guide